Wire rope core belt bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Wire rope core bucket elevator - the traction member is a wire rope core conveyor belt, using centrifugal or mixed unloading methods, suitable for conveying non-abrasive and semi-abrasive powdery, granular, small block materials with a bulk density of less than 1.5t/m3. When using ordinary rubber belts, the material temperature should not exceed 60℃; when using heat-resistant rubber belts, the maximum material temperature should not exceed 150℃.

Main Technical Parameters:
Single Row Chain
Conveying Capacity: 15m³/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 16.54 r/min
Hopper Specification: 2.5L, Hopper Width 250mm, Hopper Spacing 203.2mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 101.6mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 65mm-10%, 50mm-25%, 40mm-50%, 30mm-75%, 25mm-100%

Main Technical Parameters:
Single Row Chain
Conveying Capacity: 30m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 16.54 r/min
Hopper Specification: 7.8L, Hopper Width 300mm, Hopper Spacing 304.8mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 152.4mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 90mm-10%, 75mm-25%, 58mm-50%, 47mm-75%, 40mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 60m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 16.54 r/min
Hopper Specification: 15.7L, Hopper Width 300mm, Hopper Spacing 304.8mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 152.4mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 90mm-10%, 75mm-25%, 58mm-50%, 47mm-75%, 40mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 110m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 14.13 r/min
Hopper Specification: 35L, Hopper Width 400mm, Hopper Spacing 400mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 200mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 130mm-10%, 105mm-25%, 80mm-50%, 65mm-75%, 55mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 170m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 14.13 r/min
Hopper Specification: 52.2L, Hopper Width 600mm, Hopper Spacing 400mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 200mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 130mm-10%, 105mm-25%, 80mm-50%, 65mm-75%, 55mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 210m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 10.9 r/min
Hopper Specification: 84.6L, Hopper Width 600mm, Hopper Spacing 500mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 250mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 170mm-10%, 135mm-25%, 100mm-50%, 85mm-75%, 70mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 320m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 10.9 r/min
Hopper Specification: 127.5L, Hopper Width 700mm, Hopper Spacing 500mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 250mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 170mm-10%, 135mm-25%, 100mm-50%, 85mm-75%, 70mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 380m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 8.3 r/min
Hopper Specification: 182.5L, Hopper Width 700mm, Hopper Spacing 600mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 300mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 205mm-10%, 165mm-25%, 125mm-50%, 105mm-75%, 90mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 470m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 7.1 r/min
Hopper Specification: 260.9L, Hopper Width 700mm, Hopper Spacing 700mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 350mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 240mm-10%, 190mm-25%, 145mm-50%, 120mm-75%, 100mm-100%.

Main Technical Parameters:
Double Row Chain
Conveying Capacity: 600m3/h
Chain Speed: 0.5m/s
Drive Shaft Rotation Speed: 7.1 r/min
Hopper Specification: 330.2L, Hopper Width 800mm, Hopper Spacing 700mm
Chain Specification: Plate-type Bush Roller Chain, Pitch 350mm, Inner and Outer Chain Plates 40Cr, Pin Shaft 20CrMnMo, Bush 20CrMo, Roller 20CrMo.
Maximum Material Size: 240mm-10%, 190mm-25%, 145mm-50%, 120mm-75%, 100mm-100%.