TDG1400-Transporter Bucket Elevator dengan Tali Inti Kawat
Elevator bucket dengan inti kabel - alat penarik adalah sabuk konveyor kabel inti, menggunakan metode penyampaian centrifugal atau campuran, cocok untuk mengangkut bahan bubuk, butir, dan kecil yang tidak berasasi, semi-berasasi dengan kepadatan kumulatif kurang dari 1.5t/m3. Jika menggunakan sabuk karet biasa, suhu bahan tidak boleh lebih dari 60℃; jika menggunakan sabuk karet tahan panas, suhu bahan tertinggi tidak boleh lebih dari 150℃.
- Food Processing Industry (such as grains, sugar, coffee beans)
- Chemical Industry (non-corrosive powders, plastic granules)
- Plastics Manufacturing (raw material handling)
- Light Manufacturing (handling of light raw materials and finished products)
Basic Info.
Model NO.
| TDG1400 |
Color
|
Multi Color
|
Condition
|
New
|
Bucket Width
|
160-700mm
|
Bucket Material
|
Q235B,SUS304,NM400 |
No. of Discharge Port
|
Single or Muti Discharge Port
|
Voltage
|
220~550V
|
Motor Power
|
1.5-160kw
|
Driven Type
|
Electric Motor
|
Transport Package
|
Standard Export Package
|
Material
|
Stainless Steel
|
Application
|
Chemical Industry, Grain Transport
|
Product Name
| Wire rope core belt bucket elevator |
Bucket Volume
| 0.5-23.5L |
Body Material
|
Mild Steel, Stainless Steel 304 or Other
|
Speed
|
Adjustable or Fixed
|
Good Sealing
|
Prevent Environmental Pollution
|
Specification
|
customized
|
Production Capacity
|
200 Sets Per Months
|
Trademark | Ecoshop |
HS Code | 8428391000 |
Wire Rope Core Belt Bucket Elevator
The steel cord belt, as the core component of this equipment, boasts remarkable load-bearing capacity and long service life even in harsh working environments. Embedded steel cords reinforce the belt's overall strength, making it resistant to stretching, tearing, and wear, particularly suitable for handling heavy or sharp materials.
The buckets of the bucket elevator are evenly distributed on the steel cord belt, which is continuously driven by chains or gears. During the lifting process, the buckets scoop up material from the bottom loading zone and carry it upwards to the top unloading zone as the belt rises, achieving vertical lifting of the material. This design enables the steel cord belt bucket elevator to handle materials of various sizes, densities, and shapes, including granular, powdery, and small block materials.
There are two types of hopper selection Zg and Sg, Zg is a medium-deep hopper, Sg is a deep hopper, Sg has a larger capacity than Zg, so with the same specifications of the elevator, the selection of Sg hopper, the conveying capacity should be larger. But if the material is strong adhesion, with humid material, then select type Zg hopper, less easy to accumulate material.
Differences between bucket elevators
TDG Series
Steel Cord Belt Bucket Elevator--The traction part is steel cord core conveyor belt, adopting centrifugal or mixing method of discharging, which is suitable for conveying non-abrasive and semi-abrasive materials in the form of powder, granule and small block with the accumulation density less than 1.5t/m3. When ordinary rubber belt is used, the material temperature should not exceed 60℃; when heat-resistant rubber belt is used, the maximum material temperature should not exceed 150℃.
this type of elevator is commonly found in:
- Food Processing Industry (such as grains, sugar, coffee beans)
- Chemical Industry (non-corrosive powders, plastic granules)
- Plastics Manufacturing (raw material handling)
- Light Manufacturing (handling of light raw materials and finished products)
TH Series
Round Chain Bucket Elevator--The traction parts are high-strength round ring chain, adopting mixed type or gravity type discharging, suitable for conveying non-abrasive and semi-abrasive materials of powder, granule and small block with the bulk density less than 1.5 t/m3, and the temperature of the materials should not be more than 250°C.
this type of elevator is commonly found in:
- Metallurgy Industry (e.g., sintering ore, hot ores processing)
- Cement and Building Materials Industry (clinker, limestone, fly ash)
- Mining Industry (various mineral processing)
- Power Industry (coal handling in power plants)
NE Series
Plate Chain Bucket Elevator--The traction part is plate sleeve roller chain, the running speed of the hopper is 0.5 m/s, and it adopts gravity type discharging method, which is suitable for conveying the medium and large lumpy abrasive materials with the stacking density of less than 2.2t/m3, and the temperature of the materials should not be more than 250°C.
this type of elevator is commonly found in:
- Mining Industry (iron ore, copper ore, etc.)
- Quarry Industry (crushed stone, gravel handling)
- Metallurgy Industry (slag, ore lifting)
- Construction Materials Industry (heavy aggregates, cement raw materials)
Comparison
In summary, bucket elevators utilizing steel cord belts excel in handling light, non-abrasive materials at lower temperatures, making them ideal for food and chemical industries. Ring chain bucket elevators, capable of withstanding higher temperatures, are suited for transporting moderately dense materials in sectors like metallurgy and construction. Plate bushed roller chain bucket elevators, designed for heavier, abrasive materials at elevated temperatures, find their application predominantly in mining and heavy manufacturing. Each type is optimized for specific material characteristics and industry demands, ensuring efficient vertical transportation in diverse industrial settings.